Calling JavaScript Function From CodeBehind

Can someone provide good examples of calling a JavaScript function From CodeBehind and Vice-versa?


Thank you for visiting the Q&A section on Magenaut. Please note that all the answers may not help you solve the issue immediately. So please treat them as advisements. If you found the post helpful (or not), leave a comment & I’ll get back to you as soon as possible.

Method 1

You may try this :


Method 2

C# to JavaScript: you can register script block to run on page like following:

ClientScript.RegisterStartupScript(GetType(),"hwa","alert('Hello World');",true);

replace alert() part with your function name.

For calling C# method from JavaScript you can use ScriptManager or jQuery. I personally use jQuery. You need to decorate the method that you want to call from JavaScript with WebMethod attribute. For more information regarding calling C# method (called PageMethod) from jQuery you can refer to Dave Ward’s post.

Method 3

Calling a JavaScript function from code behind

Step 1 Add your Javascript code

<script type="text/javascript" language="javascript">
    function Func() {

Step 2 Add 1 Script Manager in your webForm and Add 1 button too

Step 3 Add this code in your button click event

ScriptManager.RegisterStartupScript(this.Page, Page.GetType(), "text", "Func()", true);

Method 4

If you need to send a value as a parameter.

string jsFunc = "myFunc(" + MyBackValue + ")";
ScriptManager.RegisterStartupScript(this.Page, Page.GetType(), "myJsFn", jsFunc, true);

Method 5

You can not do this directly. In standard WebForms JavaScript is interpreted by browser and C# by server. What you can do to call a method from server using JavaScript is.

Like this:

Step 1

public partial class Products : System.Web.UI.Page 
    public static List<Product> GetProducts(int cateogryID) 
        // Put your logic here to get the Product list 

Step 2: Adding a ScriptManager on the Page

<asp:ScriptManager ID="ScriptManager1" runat="server" EnablePageMethods="true" />

Step 3: Calling the method using JavaScript

function GetProductsByCategoryID(categoryID)
    PageMethods.GetProducts(categoryID, OnGetProductsComplete);

Take a look at this link.

To call a JavaScript function from server you can use RegisterStartupScript:


Method 6

Another thing you could do is to create a session variable that gets set in the code behind and then check the state of that variable and then run your javascript. The good thing is this will allow you to run your script right where you want to instead of having to figure out if you want it to run in the DOM or globally.

Something like this:
Code behind:

Session["newuser"] = "false"

In javascript

var newuser = '<%=Session["newuser"]%>';
 if (newuser == "yes")

Method 7

You cannot. Codebehind is running on the server while JavaScript is running on the client.

However, you can add <script type="text/javascript">someFunction();</script> to your output and thus cause the JS function to be called when the browser is parsing your markup.

Method 8

You can use literal:

this.Controls.Add(new LiteralControl("<script type='text/javascript'>myFunction();</script>"));

Method 9

IIRC Code Behind is compiled serverside and javascript is interpreted client side. This means there is no direct link between the two.

What you can do on the other hand is have the client and server communicate through a nifty tool called AJAX.

Method 10

Working Example :_

<%@ Page Title="" Language="C#" MasterPageFile="~/MasterPage2.Master" AutoEventWireup="true" CodeBehind="History.aspx.cs" Inherits="NAMESPACE_Web.History1" %>

<asp:Content ID="Content1" ContentPlaceHolderID="head" runat="Server">
    <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajax" %>

 <script type="text/javascript" src=""></script> 

        <script type="text/javascript">

            function helloFromCodeBehind() {



<asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" runat="Server">

 <div id="container"  ></div>


Code Behind

using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;

namespace NAMESPACE_Web
    public partial class History1 : System.Web.UI.Page
        protected void Page_Load(object sender, EventArgs e)

            ScriptManager.RegisterStartupScript(this, GetType(), "displayalertmessage", "helloFromCodeBehind()", true);


Possible pitfalls:-

  1. Code and HTML might not be in same namespace
  2. CodeBehind="History.aspx.cs" is pointing to wrong page
  3. JS function is having some error

Method 11

ScriptManager.RegisterStartupScript(this, this.Page.GetType(),"updatePanel1Script", "javascript:ConfirmExecute()",true/>

Method 12

This is how I’ve done it.

HTML markup showing a label and button control is as follows.

  <form id="form1" runat="server"> 
    <asp:Label ID="lblJavaScript" runat="server" Text=""></asp:Label> 
    <asp:Button ID="btnShowDialogue" runat="server" Text="Show Dialogue" /> 

JavaScript function is here.

<head runat="server"> 
  <title>Calling javascript function from code behind example</title> 
  <script type="text/javascript"> 
    function showDialogue() { 
      alert("this dialogue has been invoked through codebehind."); 

Code behind to trigger the JavaScript function is here.

lblJavaScript.Text = "<script type='text/javascript'>showDialogue();</script>";

Method 13

I’ve been noticing a lot of the answers here are using ScriptManager.RegisterStartupScript and if you are going to do that, that isn’t the right way to do it. The right way is to use ScriptManager.RegisterScriptBlock([my list of args here]). The reason being is you should only be using RegisterStartupScript when your page loads (hence the name RegisterStartupScript).


ScriptManager.RegisterClientScriptBlock(Page, GetType(String), "myScriptName" + key, $"myFunctionName({someJavascriptObject})", True)

in C#:

ScriptManager.RegisterClientScriptBlock(Page, typeof(string), "myScriptName" + key, $"myFunctionName({someJavascriptObject})", true);

Of course, I hope it goes without saying that you need to replace key with your key identifier and should probably move all of this into a sub/function/method and pass in key and someJavascriptObject (if your javascript method requires that your arg is a javascript object).

MSDN docs:

Method 14

ScriptManager.RegisterStartupScript(Page, GetType(), "JavaFunction", "AlertError();", true);

using your function is enough

Method 15

Try This in Code Behind and it will worked 100%

Write this line of code in you Code Behind file

string script = "window.onload = function() { YourJavaScriptFunctionName(); };";
ClientScript.RegisterStartupScript(this.GetType(), "YourJavaScriptFunctionName", script, true);

And this is the web form page

<script type="text/javascript">
    function YourJavaScriptFunctionName() {

Method 16

this works for me

object Json_Object=maintainerService.Convert_To_JSON(Jobitem);
ScriptManager.RegisterClientScriptBlock(this,GetType(), "Javascript", "SelectedJobsMaintainer("+Json_Object+"); ",true);

Method 17

Since I couldn’t find a solution that was code behind, which includes trying the ClientScript and ScriptManager like mutanic and Orlando Herrera said in this question (they both somehow failed), I’ll offer a front-end solution that utilizes button clicks to others if they’re in the same position as me. This worked for me:

HTML Markup:

<asp:button ID="myButton" runat="server" Text="Submit" OnClientClick="return myFunction();"></asp:button>


function myFunction() {
    // Your JavaScript code
    return false;

I am simply using an ASP.NET button which utilizes the OnClientClick property, which fires client-side scripting functions, that being JavaScript. The key things to note here are the uses of the return keyword in the function call and in the function itself. I’ve read docs that don’t use return but still get the button click to work – somehow it didn’t work for me. The return false; statement in the function specifies a postback should NOT happen. You could also use that statement in the OnClientClick property: OnClientClick="myFunction() return false;"

Method 18

I used ScriptManager in Code Behind and it worked fine.

ScriptManager.RegisterStartupScript(UpdatePanel1, UpdatePanel1.GetType(), "CallMyFunction", "confirm()", true);

If you are using UpdatePanel in ASP Frontend.
Then, enter UpdatePanel name and ‘function name’ defined with script tags.

Method 19

Thank “Liko”, just add a comment to his answer.

string jsFunc = "myFunc(" + MyBackValue + ")";
ScriptManager.RegisterStartupScript(this.Page, Page.GetType(), "myJsFn", jsFunc, true);

Added single quotes (') to variable, otherwise it will give error message:

string jsFunc = "myFunc('" + MyBackValue + "')";

Method 20

You can’t call a Javascript function from the CodeBehind, because the CodeBehind file contains the code that executes server side on the web server. Javascript code executes in the web browser on the client side.

Method 21

You can expose C# methods on codebehind pages to be callable via JavaScript by using the ScriptMethod attribute.

You cannot call JavaScript from a CodeBehind – that code exists solely on the client.

All methods was sourced from or, is licensed under cc by-sa 2.5, cc by-sa 3.0 and cc by-sa 4.0

0 0 votes
Article Rating
Notify of

Inline Feedbacks
View all comments
Would love your thoughts, please comment.x